Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Interfacing k type thermocouple with teensy 3.2 for temperature measurement

Hybrid View

  1. #1
    Junior Member
    Join Date
    Dec 2019
    Posts
    6

    Interfacing k type thermocouple with teensy 3.2 for temperature measurement

    Hi! I need to measure temperature for a project I'm working on and I was wondering how I could interface a k type thermocouple with teensy 3.2 so that I can get continuous temperature readings on the serial monitor. I'm an absolute beginner so any and every help is much appreciated! Thank you!

  2. #2
    Senior Member
    Join Date
    May 2015
    Location
    USA
    Posts
    411
    Buy a thermocouple module (about $5) and then connect it via SPI. Find a library that supports it.

  3. #3
    Junior Member
    Join Date
    Oct 2017
    Location
    Roskilde, Denmark
    Posts
    13
    I recommend you to purchase a MAX31856 based ready made module, from eBay, Adafruit etc.
    I'm using 2 and 4 channel modules from "playingwithfusion" , good quality, very stable, and can be used both with a 3.3V and a 5V MCU.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •