AllenCherry
Active member
Anyone who can help please!
I am using the Teensy 3.5 and WIZ8510, trying to receive a UDP multicast data stream on 224.11.5.62, port 41000.
I am using the sketch 'UDPSendReceiveString', which works perfectly if the data is sent out from the 'sending' computer to (say) 192.168.0.100 port 55278, and I set that as the IP address of the WIZ8510 and local port 55278.
But I can't get it to receive the data from the multicast address of 224.11.5.62 port 41000, which is being used by the 'sending' computer, even with the WIZ8510 set to that IP and port.
I am using the MAC address 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED as in the sketch example.
Can anyone suggest what I am doing wrong?
Thank you in anticipation of your help,
Allen
I am using the Teensy 3.5 and WIZ8510, trying to receive a UDP multicast data stream on 224.11.5.62, port 41000.
I am using the sketch 'UDPSendReceiveString', which works perfectly if the data is sent out from the 'sending' computer to (say) 192.168.0.100 port 55278, and I set that as the IP address of the WIZ8510 and local port 55278.
But I can't get it to receive the data from the multicast address of 224.11.5.62 port 41000, which is being used by the 'sending' computer, even with the WIZ8510 set to that IP and port.
I am using the MAC address 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED as in the sketch example.
Can anyone suggest what I am doing wrong?
Thank you in anticipation of your help,
Allen