Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 5 of 5

Thread: [queued] hatsune miku cosplay based on teensy 3.6

Hybrid View

  1. #1
    Junior Member
    Join Date
    Jan 2020
    Posts
    4

    [queued] hatsune miku cosplay based on teensy 3.6

    Hello
    just a little topic to share with you this cosplay project for my friend.
    she ask to try to make an original hatsune miku for the #mikuexpo2020 show in paris.
    I'm trained to work with arduino and far before to use 8051 based microcontroller (the one used in my robot build in 1999 and winner of the E=M6 french contest). but the arduino ram and speed limitation is a problem when driving lot of WS2812 pixels and color TFT + oled.
    so I've learn to use the teensy board and here are some pictures of the project
    first is the original design to realize:


    it's a "vocaloid" from yamaha and designed based on DX100 and DX7 keyboards
    so I've designed a bezel and front overlay based on the DX100 front panel

    and a light bezel for the leds


    the electronic board


    final test


    on the arm


    the headset design

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	miku.png 
Views:	25 
Size:	277.6 KB 
ID:	18779   Click image for larger version. 

Name:	01.jpg 
Views:	28 
Size:	121.8 KB 
ID:	18780  

    Click image for larger version. 

Name:	01.jpg 
Views:	26 
Size:	136.4 KB 
ID:	18781   Click image for larger version. 

Name:	02.jpg 
Views:	29 
Size:	113.3 KB 
ID:	18782  

    Click image for larger version. 

Name:	03.jpg 
Views:	20 
Size:	115.4 KB 
ID:	18783   Click image for larger version. 

Name:	01.jpg 
Views:	23 
Size:	137.5 KB 
ID:	18784  


  2. #2
    Junior Member
    Join Date
    Jan 2020
    Posts
    4
    and the end (I've made the post short

    the squares on the head



    and the final test: the event ^ ^


    and a short movie of the test
    http://thequark.free.fr/miku_cosplay/test.m4v

  3. #3
    Senior Member
    Join Date
    May 2018
    Posts
    182
    Great job!

  4. #4
    Junior Member
    Join Date
    Jan 2020
    Posts
    4
    thank you
    lot of work but the final result is great

  5. #5
    Junior Member
    Join Date
    Jan 2020
    Posts
    4
    woops sorry
    I've just this this section was for project submission on the blog.
    This thread was to show how I've built the system around the teensy.
    My bad

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •