phil123456
Active member
Hello,
I try to figure
- the i/o pins used on the Teensy 3.6 for I2S so I can plug my own chip to it
- do I need to modify input_i2s.cpp, considering that the chips I looked at don't have the same I2S pins
chips :
PCM1802 pins : LRCK FSYNC DOUT BCK SCKI (this one supposed to match LRCK, but it's not really clear in the datasheet)
CS5343 pins : LRCK MCLK SDOUT SCLK
I am bit confused, since PCM1802 has an additional pin, and the names barely match
any help, greatly appreciated
thanks
I try to figure
- the i/o pins used on the Teensy 3.6 for I2S so I can plug my own chip to it
- do I need to modify input_i2s.cpp, considering that the chips I looked at don't have the same I2S pins
chips :
PCM1802 pins : LRCK FSYNC DOUT BCK SCKI (this one supposed to match LRCK, but it's not really clear in the datasheet)
CS5343 pins : LRCK MCLK SDOUT SCLK
I am bit confused, since PCM1802 has an additional pin, and the names barely match
any help, greatly appreciated
thanks