Audio Recorder, Can't Hear Playback

Status
Not open for further replies.

Fuzzy

Active member
Hello,

This is my very first test with the Teensy Audio Library so probably just make a basic error.

Simply, can't hear any playback from the recording in the Recorder Example. I have tested audio both out of the headphones and the Line Out with a 0.5W speaker.

All the buttons seem to be working fine (Stop, Play, Record). I checked the SD card and the file RECORD.RAW was written. So it must be something with my mic or output?

Here is the circuit if it helps:
recorder_teensy.jpg

Thanks x100
 
You can not connect a speaker to lineout.
Linout is to connect an ampilifier.
The easiest is probably to connect active PC-Speakers.
Then, try the other examples and first test if you hear something.
Try headphones, too.
 
Ah yes okay I will connect the line to some amplification and try again.

I tried headphones. Any reason why I could not hear anything through headphones? Is there a way in the code to specify line-out versus headphones? Or is it always outputting to both?

thanks.
 
If the examples do not work, there is something wrong with your hardware. Check the soldering and such things..
Use the guitar example.
 
The connections to the Teensy's power and ground look to me like you have just stuck the jumper pins in the holes without any solder.
recorder_teensy_1.jpg
There also appear to be other connections to the boards which are done like this.
Connections to those pins on the boards MUST be soldered.

Pete
 
Status
Not open for further replies.
Back
Top