Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Teensy 3.2 Art-NET with Audio Adaptor

Threaded View

  1. #1
    Junior Member
    Join Date
    Jan 2020
    Posts
    18

    Teensy 3.2 Art-NET with Audio Adaptor

    Hi guys,

    I am working on a project that involves controlling 10x Rows of ws2812b , 12meter each ( 120M total = 7200 Pixels ) ( more on the initial setup: https://forum.pjrc.com/threads/59309...nimating-ideas ).

    I decided to create a new thread, as I have shifted away from the method I used , and now I am going with Art-NET, and was thinking of adding an Audio adaptor which has SD card, in case I find a way how to make effects based on Audio input.

    My question is, is there a guideline on how to solder Teensy 3.2 + OctoWS2811 + wiz850io + Audio Adaptor ? Is this even a good approach?

    I have already tested Teensy 3.2 + OctoWS2811, I was worried that adding the ethernet shield + Audio will make it somehow incompatible/run to other issues?

    Thanks
    Last edited by Naru; 02-03-2020 at 11:15 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •