Teensy 4.0 + Rev C Audio Shield + headphones = no audio

Status
Not open for further replies.

addms

New member
I'm not able to hear any audio through the headphones. I'm using the audio example sketches, such as ToneSweep and Guitar. They don't give any errors and the serial outputs seem to be what's expected. I've tested with multiple headphones. I've uploaded other sketches to the Teensy (the blinking LED one) and that worked.
It's a Teensy 4.0 with the Rev C version of the audio shield. I'm using Mac.

Here's my setup:

IMG_2299.jpg
IMG_2300.jpg
IMG_2301.jpg
IMG_2302.jpg
 
Yes, Rev C is for Teensy 3.x.

If you use wires to route the signals to the correct pins, Rev C can work with Teensy 4.0. But it will not work when plugged in directly, because the five I2S signals are in the places for Teensy 3.x. They're on different pins for Teensy 4.0.
 
Status
Not open for further replies.
Back
Top