Audio board Rev D for teensy 3.6

Status
Not open for further replies.

Eester

New member
Hi I’m new to programming I have teensy 3.6 with audio board marked Rev D for 3.6 must I rewire audio for 3.6 ? Or just solder header pins ? Any help thank you
 
The Rev D board is wired for direct connect to a Teensy 4.0 with pins moved as needed from the T_3.x locations.

For direct solder a Rev C Audio board works on the Teensy 3.2/3.5/3.6.

To use the Rev D board on a T_3.6 would require manually connecting those changed pins to the proper locations.
 
Status
Not open for further replies.
Back
Top