Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Pins teensy 3.6 to Audio board Rev B

  1. #1
    Junior Member
    Join Date
    Feb 2020
    Posts
    3

    Pins teensy 3.6 to Audio board Rev B

    Hi Iím newbie here, I have teensy 3.6 want to connect audio board Rev B together . The correct way to mount together Iím very confused using 14 pin header pin do I skip one not used ? Or must be hard wired in ? Which pins match up with teensy 3.6 to audio board rev B ? Can someone show me me pin for pin thank you

  2. #2
    Senior Member+ Frank B's Avatar
    Join Date
    Apr 2014
    Location
    Germany NRW
    Posts
    6,882
    This way:

    Note, the headphone-connector and USB are on the same side. The 3.6 is longer than the audio shield - ignore that
    Don't use wires - if you don't do it right they can be very unreliable, and soon we will read "Audio shield does not work" from you...

    More information: https://www.pjrc.com/store/teensy3_audio.html
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	teensy3_audio_quadch[1].jpg 
Views:	4 
Size:	58.2 KB 
ID:	19192  

  3. #3
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    21,827
    Quote Originally Posted by Eester View Post
    Which pins match up with teensy 3.6 to audio board rev B ? Can someone show me me pin for pin thank you
    Connect it like this:

    Click image for larger version. 

Name:	DSC_0730_web.jpg 
Views:	11 
Size:	157.5 KB 
ID:	19193

    DO NOT use wires. It must be mounted close to the audio shield, because rev B does not have the extra 100 ohm resistor on MCLK.

  4. #4
    Junior Member
    Join Date
    Feb 2020
    Posts
    3
    Thank you, now working on simple blinking 73

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •