Teensy USB Name

[jkoffman]

I went on a bit of a hunt to try to figure out where the computer interface name that appears when you use USB Audio is defined...and I came up blank. There's no input_USB or output_USB, so I thought it might be in the core files, but I didn't see it there either. I probably just missed it by choosing poorly while searching. Has anyone else ever found it?

Thanks!

 

[wcalvert]

https://github.com/PaulStoffregen/cores/blob/master/teensy3/usb_desc.h

Starting on line 742. I don't have hardware sitting next to me to verify, but I speculate that you can use the name.c example code to change the USB Audio name: https://github.com/PaulStoffregen/Teensyduino_Examples/blob/master/USB_MIDI/MIDI_name/name.c (That example project can be opened from the examples menu in the Arduino IDE)

 

[jkoffman]

Ah interesting, thank you! I will investigate further!

Thanks again!

Update: In my examples menu I don't have that set that examples, but I did read the version on GitHub. This is entirely my inexperience here, but is there no need to #include the names.c file?

I will try to figure out a way to make this work!

 

[wcalvert]

If you are using the Arduino IDE, you don't need to #include the file, it will automagically compile it if it's in the same folder. See here for the sketch: https://github.com/PaulStoffregen/Teensyduino_Examples/blob/master/USB_MIDI/MIDI_name/MIDI_name.ino

 

[jkoffman]

Ah, gotcha. I haven't had much experience with that in the Arduino IDE. Thank you!