Press Brake Controller

mariusl

Active member
Hi
I started a project using the Teensy 3.6 to control a Press Brake machine. The design can however be used for many applications as I designed it as generic as possible.

The Controller has the following functions:

1) Teensy 3.6
2) 4D systems 7.0" display (could be any serial display)
3) 24v Input voltage.
4) 1 x Rs485 channel
5) 3 x 0 to 10V PWM analog signals ( galvanic isolated) used to drive VFD's
6) 3 x Step/Dir channels for stepper drives
7) 3 x Encoder / glass scale input channels (TTL and differential)
8) 8 x Open Collector output drivers specifically for operating automotive or relay loads
9) 8 x optically isolated inputs

I just received the PCB's so once they have been built up and tested I will report back.
cnc_controller.jpeg
 
Last edited:
Back
Top