Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Press Brake Controller

  1. #1

    Press Brake Controller

    Hi
    I started a project using the Teensy 3.6 to control a Press Brake machine. The design can however be used for many applications as I designed it as generic as possible.

    The Controller has the following functions:

    1) Teensy 3.6
    2) 4D systems 7.0" display (could be any serial display)
    3) 24v Input voltage.
    4) 1 x Rs485 channel
    5) 3 x 0 to 10V PWM analog signals ( galvanic isolated) used to drive VFD's
    6) 3 x Step/Dir channels for stepper drives
    7) 3 x Encoder / glass scale input channels (TTL and differential)
    8) 8 x Open Collector output drivers specifically for operating automotive or relay loads
    9) 8 x optically isolated inputs

    I just received the PCB's so once they have been built up and tested I will report back.
    Click image for larger version. 

Name:	cnc_controller.jpeg 
Views:	18 
Size:	64.1 KB 
ID:	19334
    Last edited by mariusl; 03-10-2020 at 05:07 PM.

  2. #2
    I forgot, it also has an I2C expansion port for another 16 I/O's

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •