Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Help me resurrect a T4. Cap value and other details?

  1. #1

    Help me resurrect a T4. Cap value and other details?

    Can some one help me here? I soldered a 2x5 pin header on the backside pins and managed to knock off a cap near the pin 27 pad. At least I think I did, it's missing... Dead Teensy. Could some one who knows tell me what the value, package and other details of that cap are so I can order one to replace it? See the picture.

    Click image for larger version. 

Name:	dead teensy.png 
Views:	19 
Size:	128.3 KB 
ID:	19382
    Last edited by PhilB; 03-16-2020 at 06:01 AM.

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    21,473
    It's this one, 0.22 uF.

    Click image for larger version. 

Name:	schematic40.png 
Views:	12 
Size:	7.2 KB 
ID:	19384

  3. #3
    Thank you! I assume it's a 402 package.

  4. #4
    Man, those 402s are TINY. Only took me 3 tries and it's ugly but my T4 lives again!

    Thanks again for your help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •