First download to the board (just got it) and I bricked it. Went through the basics, shutting down computer and restarting, trying different cables, different ports, different PCs, out of circuit, holding the button then plugging it in. Plugged in other boards (Adafruit) I have they work fine.
Board is not seen when plugged in. No USB "Ding", nothing. No unknown drivers in device manager. No lights on board, no smoke, no heat.
Files and libraries are attached. I was attempting to use a I2C LCD display on the 2nd I2C port. I modified an exising LiquidCrystal_I2C (drfrobot?) I had found online and used before on an UNO. I modified this one to use i2c_t3 library added the ability to pass the scl and sda pin numbers, and change _I2C to _I2C_T3 (so I knew the difference) and that was it.
I have no idea if it worked or downloaded to the Teensy 3.2 as the board acts completely dead.
What to try next?
Board is not seen when plugged in. No USB "Ding", nothing. No unknown drivers in device manager. No lights on board, no smoke, no heat.
Files and libraries are attached. I was attempting to use a I2C LCD display on the 2nd I2C port. I modified an exising LiquidCrystal_I2C (drfrobot?) I had found online and used before on an UNO. I modified this one to use i2c_t3 library added the ability to pass the scl and sda pin numbers, and change _I2C to _I2C_T3 (so I knew the difference) and that was it.
I have no idea if it worked or downloaded to the Teensy 3.2 as the board acts completely dead.
What to try next?
Miracle Max: With all dead, well, with all dead there's usually only one thing you can do.
Inigo Montoya: What's that?
Miracle Max: Go through his clothes and look for loose change.