AlfaKeNTAvR
Member
Hello everyone,
I am new to this forum and to Teensy boards. I am having the following problem:
Teensy 3.5 just stopped working with no particaular reason. I made several test with my code and custom extension board for teensy 3.5, which were working for past 3 weeks with no problems. I am controlling 4 stepper motors using TeensyStep, if this may help solving problem.
I'd tested several improvements in my code 2 hours ago and then continued programming with teensy plugged in. After 30 minutes I tried to load new code, but recieved a message like "... press Program button", I did this and nothing happend. After that I figured out that nothing happens if plug Teensy in and out. I've tried several USB-cable. Gone through several suggestions, but nothing changed.. It's just not recognized by Windows 10 anymore. However, I've catched a message from Windows that the device is working incorrecntly 2 times during testing. I just can't understand what happened.
I've gone through these threads before writting here:
https://forum.pjrc.com/threads/56821-Teensy-3-5s-stopped-supporting-USB-connection
https://forum.pjrc.com/threads/3752...not-recognized-by-Win-10-COM-port-strangeness
https://www.pjrc.com/teensy/troubleshoot.html
Any help on that?
Best regards, Nikita
I am new to this forum and to Teensy boards. I am having the following problem:
Teensy 3.5 just stopped working with no particaular reason. I made several test with my code and custom extension board for teensy 3.5, which were working for past 3 weeks with no problems. I am controlling 4 stepper motors using TeensyStep, if this may help solving problem.
I'd tested several improvements in my code 2 hours ago and then continued programming with teensy plugged in. After 30 minutes I tried to load new code, but recieved a message like "... press Program button", I did this and nothing happend. After that I figured out that nothing happens if plug Teensy in and out. I've tried several USB-cable. Gone through several suggestions, but nothing changed.. It's just not recognized by Windows 10 anymore. However, I've catched a message from Windows that the device is working incorrecntly 2 times during testing. I just can't understand what happened.
I've gone through these threads before writting here:
https://forum.pjrc.com/threads/56821-Teensy-3-5s-stopped-supporting-USB-connection
https://forum.pjrc.com/threads/3752...not-recognized-by-Win-10-COM-port-strangeness
https://www.pjrc.com/teensy/troubleshoot.html
Any help on that?
Best regards, Nikita