laptophead
Well-known member
I found the commands that supposedly work on the 4.0 but they do nothing for the 3.6.
I am triggering the reset by a serial command
I get the message " RESETTING TEENSY" but the teensy does not restart.
I would know from all the calibration messages that my attach MPU9250 is sending me when I power up.
Thanks
I am triggering the reset by a serial command
HTML:
if (Serial5.available()) { // Read intstructions from Win 10 tablet
if (First == 'R')
{ Serial.println (" RESETTING TEENSY");
#define CPU_RESTART_ADDR (uint32_t *)0xE000ED0C
#define CPU_RESTART_VAL 0x5FA0004
#define CPU_RESTART (*CPU_RESTART_ADDR = CPU_RESTART_VAL);
}
I get the message " RESETTING TEENSY" but the teensy does not restart.
I would know from all the calibration messages that my attach MPU9250 is sending me when I power up.
Thanks