Hello, I have connected the USB connector to the 5 pin header on the Teensy 4.1 and have code that receives MIDI messages from USB Devices. I would like to have my code know when a USB MIDI device is plugged in and removed and if possible, the vendor, device ID, manufacturer IDs or other identifying information.
I see that this information is available on the USBDriver but I'm not sure how to access that from the MIDIDevice object.
Is there a way to do this?
Thanks
Jay
I see that this information is available on the USBDriver but I'm not sure how to access that from the MIDIDevice object.
Is there a way to do this?
Thanks
Jay