Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 7 of 7

Thread: Audio Board Equivalent for Custom PCB

  1. #1
    Member houtson's Avatar
    Join Date
    Aug 2015
    Location
    Scotland
    Posts
    86

    Audio Board Equivalent for Custom PCB

    I've built a custom effects board with Teensy and AudioBoard which has been great fun but the connection from the Audioboard to inputs and outputs are a bit of a mess.

    I know I could tidy up the wire or add connectors but for the next version I'd like to include the functions of the AudioBoard on the custom PCB so that once complete all I need to do is plug in a Teensy.

    I'm good with the AudioBoard schematics and details and ok with basic hand soldering surface mount but the STGL5000 QFN looks tricky.

    Looking for some help or ideas:

    - anyone got experience hand soldering the QFN package successfully (don't have a reflow oven and this will be a one off so rather not invest in lots of new stuff)

    - are there any other audio board type designs that people have experience of with Teensy for basic audio project with easier to solder packages (just need 16-bit, line in and out + phones if poss)

    thanks for any help,
    Paul

    Click image for larger version. 

Name:	IMG_3170D.jpeg 
Views:	26 
Size:	201.3 KB 
ID:	20159Click image for larger version. 

Name:	IMG_3172D.jpeg 
Views:	21 
Size:	183.2 KB 
ID:	20160

  2. #2
    Member
    Join Date
    Apr 2020
    Location
    Tucson
    Posts
    20
    Buy an audio board, a heat gun kit, flux and solder paste, and practice "repairing" the chip. Or you could make your own boards and buy a few chips. I think the key is learning to use the heat gun and flux. If you're going to stay with the hobby, an inexpensive heat gun will be a good investment. Go watch "Jessa" on her mac repair channel, she has dozens of videos showing how to use a heat gun. Same with Louis Rossman.

    Your kit, as it is, looks as professional as any 70's mainstream stereo on the inside. Good job.

  3. #3
    Member houtson's Avatar
    Join Date
    Aug 2015
    Location
    Scotland
    Posts
    86
    thanks @boxxofrobots, not sure inside of a 70's stereo was the look I was going for but thanks for the link to Jessa

    doesn't look like many alternative options so will have a look into heat gun etc. and give that a go with and old audioboard

    cheers Paul

  4. #4
    Member
    Join Date
    Apr 2020
    Location
    Tucson
    Posts
    20
    By the way, you CAN solder that chip with a soldering iron and flux and solder remover tape. There are also videos showing how to do it. I'd built my own surface mount boards using cardstock and fine wire and gluing the smds down before wiring them - you can solder just about anything with enough patience and technique.

  5. #5
    Senior Member Blackaddr's Avatar
    Join Date
    Mar 2017
    Location
    Canada
    Posts
    260
    Quote Originally Posted by boxxofrobots View Post
    By the way, you CAN solder that chip with a soldering iron and flux and solder remover tape. There are also videos showing how to do it. I'd built my own surface mount boards using cardstock and fine wire and gluing the smds down before wiring them - you can solder just about anything with enough patience and technique.
    The Teensy Audio library supports other codecs as well. Take a look at any of the control_* files. Those are your options without having to write your own stuff.
    https://github.com/PaulStoffregen/Audio

    One of the reasons I selected the WM8731 codec was the TSOP package is very hand-solderable. The Audio library has basic support for this codec, and I have extended support for a few extra features in my BALibrary for for guitar effects here:
    https://github.com/Blackaddr/BALibrary

  6. #6
    Member houtson's Avatar
    Join Date
    Aug 2015
    Location
    Scotland
    Posts
    86
    @blackaddr thanks for that, I'll look into WM8731, I can deal with TSOP so looks promising
    Your board looks great. cheers, Paul

  7. #7
    Member houtson's Avatar
    Join Date
    Aug 2015
    Location
    Scotland
    Posts
    86
    @blackaddr I've been looking at your schematic, which has been really helpful thanks for sharing it.

    I know your board is focussed towards guitars and has significant attention to that with the preamp.

    I'm only interested in Line in - in your schematic it looks as though you connect line in direct to the codec without any additional component, does that work ok or is it that you don't really use line in on that boards?

    thanks Paul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •