Thread's closed, but I must be misreading this post:
"These are all the unconnected pins on Teensy 4.0 which could become available:
[..]
B0_06 A8 QTIMER3_TIMER0
B0_07 A9 QTIMER3_TIMER1
B0_08 B9 QTIMER3_TIMER2
B1_10 B13 QTIMER3_TIMER3
https://forum.pjrc.com/threads/5802...larger-Teensy4?p=219000&viewfull=1#post219000
Both 4.0 and 4.1 have the same 10 qtimers exposed, including all 4 of the QT3, right?
Neither makes these 6 accessible, out of a total of 16:
B1_08 A12 QTIMER1_TIMER3
B0_04 C8 QTIMER2_TIMER1
B0_05 B8 QTIMER2_TIMER2
B1_09 A13 QTIMER2_TIMER3
B0_09 C9 QTIMER4_TIMER0
B1_11 C13 QTIMER4_TIMER3
Haven't looked at this in a while, but this
https://github.com/PaulStoffregen/PulsePosition/blob/master/PulsePositionIMXRT.cpp
is the go-to for T4.x qtimer use? @mjs513 ?
What is the resolution using capture to detect rising/falling edges for pulsewidth? 65MHz ?
"These are all the unconnected pins on Teensy 4.0 which could become available:
[..]
B0_06 A8 QTIMER3_TIMER0
B0_07 A9 QTIMER3_TIMER1
B0_08 B9 QTIMER3_TIMER2
B1_10 B13 QTIMER3_TIMER3
https://forum.pjrc.com/threads/5802...larger-Teensy4?p=219000&viewfull=1#post219000
Both 4.0 and 4.1 have the same 10 qtimers exposed, including all 4 of the QT3, right?
Neither makes these 6 accessible, out of a total of 16:
B1_08 A12 QTIMER1_TIMER3
B0_04 C8 QTIMER2_TIMER1
B0_05 B8 QTIMER2_TIMER2
B1_09 A13 QTIMER2_TIMER3
B0_09 C9 QTIMER4_TIMER0
B1_11 C13 QTIMER4_TIMER3
Haven't looked at this in a while, but this
https://github.com/PaulStoffregen/PulsePosition/blob/master/PulsePositionIMXRT.cpp
is the go-to for T4.x qtimer use? @mjs513 ?
What is the resolution using capture to detect rising/falling edges for pulsewidth? 65MHz ?