Is it possible to generate a DMA trigger when the FlexPWM counter on Teensy 4.0 reaches the value specified by one of the VALx (e.g. VAL3) registers of a FlexPWM submodule? From what I understand, this behavior would be similar to how the FlexTimers (FTM0, FTM1, etc.) worked on Teensy 3.6. By this, is mean that you could set the DMA transfer request source to DMAMUX_SOURCE_FTM0_CH0 and then this would generate the trigger when the FTM0 timer counter value was equal to the CH0 value (or at least that is my understanding from watching videos, reading forum posts and the like). Can anyone offer any advice?

Thanks,

Michael