Hello I would like to create a teensy 4.x custom board. You might ask why i chose teensy, is primarily because is fast and because most importantly can be programmed by the Arduino IDE which makes me not have to rewrite libraries for my modules.
My Questions are.
1.) If buy all the IC in the teensy 4.x schematics and smack them into a pcb would they work instantly? No bootloaders to install ? I willing to buy the boards and desolder the parts anyway . Buying the IC individually would save me some time and a few dollars.
2.) Im primarily looking at teensy 4.1 because of the number of pins it have, Does it still have I/O pins i can use (using Arduino APIs) that were not eposed in that board?
Thank you very much.
My Questions are.
1.) If buy all the IC in the teensy 4.x schematics and smack them into a pcb would they work instantly? No bootloaders to install ? I willing to buy the boards and desolder the parts anyway . Buying the IC individually would save me some time and a few dollars.
2.) Im primarily looking at teensy 4.1 because of the number of pins it have, Does it still have I/O pins i can use (using Arduino APIs) that were not eposed in that board?
Thank you very much.
Last edited: