Davidelvig
Well-known member
New board based on Teensy 3.2 and MKL02 boot loader from PJRC
When running Teensyduino (and no Teensy Loader) , connecting the new board, and pressing reset, I see this in the Tools/Port menu
This is identical to the behavior on an off-the-shelf Teensy 3.2 purchased form PJRC
After running Teensy Loader, I see this with my custom board
- no useful Serial ports
In comparison, the off-the-shelf Teensy 3.2 board after Teensy Loader runs shows the usual
My sense is that I have a lot working here.
What's next to test?
Thanks
Dave
When running Teensyduino (and no Teensy Loader) , connecting the new board, and pressing reset, I see this in the Tools/Port menu
This is identical to the behavior on an off-the-shelf Teensy 3.2 purchased form PJRC
After running Teensy Loader, I see this with my custom board
- no useful Serial ports
In comparison, the off-the-shelf Teensy 3.2 board after Teensy Loader runs shows the usual
My sense is that I have a lot working here.
What's next to test?
Thanks
Dave