Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Teensy 4.1 Pinout

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Posts
    1

    Teensy 4.1 Pinout

    Hello,
    I have been creating a footprint for the Teensy4.1 IMXRT1060 processor in anticipation that the boot-loader chip may be released, and think I have found a mistake on the schematic. Where the Pins B1_13 & B1_12 that are labeled as Ball D1 & D2 .
    What I think it should be is balls D14 & D13. Is this correct?

  2. #2
    I just noticed this too. D2 is EMC_25 and D1 is EMC_28, which are also on the schematic.

  3. #3
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    22,459
    Opps, yes, you're right, that's an error on the schematic!

    I've uploaded a fixed schematic. Sorry for the confusion due to an error on my part.

    https://www.pjrc.com/teensy/schematic.html

  4. #4
    Looks good, thank you!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •