Teensy2Questions
New member
I want to make a custom keyboard. It will have 6 rows and 18 columns, so I need 24 digital in pins for that. That seems to work out ok since the teensy2.0 and teensy2.0++ both have more than 24 i/o pins.
I also want macro functionality. I.e., somewhere an array of scancodes is stored, and when the macro key is pressed, that array is iterated and the scancodes sent over usb to the computer.
Now, when programming the teensy, does it upload your program to flash or eeprom? I would like to use the entire flash for macros if possible, and eeprom for keyboard firmware.
I will be programming my own custom keyboard firmware.
In case the teensy by default uploads your program to flash, is there any way to override that decision? As in, force reprogram the eeprom and leave flash storage alone?
I also want macro functionality. I.e., somewhere an array of scancodes is stored, and when the macro key is pressed, that array is iterated and the scancodes sent over usb to the computer.
Now, when programming the teensy, does it upload your program to flash or eeprom? I would like to use the entire flash for macros if possible, and eeprom for keyboard firmware.
I will be programming my own custom keyboard firmware.
In case the teensy by default uploads your program to flash, is there any way to override that decision? As in, force reprogram the eeprom and leave flash storage alone?