Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: "Vin" pin too close to confort

  1. #1
    Junior Member
    Join Date
    Jul 2020
    Posts
    6

    "Vin" pin too close to confort

    Hi there, I just soldered the pins on 4.1 board. Looks like the Vin pin is too close to the USB pad. Is there a bridge on the board there? Can I use it as is in the pictures?

    Thanks,
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Annotation 2020-07-02 124653.jpg 
Views:	9 
Size:	101.0 KB 
ID:	20839   Click image for larger version. 

Name:	Annotation 2020-07-02 1246532.jpg 
Views:	9 
Size:	87.4 KB 
ID:	20840  


  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    22,532
    They are supposed to be connected. It is this wire on the schematic.

    Click image for larger version. 

Name:	schematic41.png 
Views:	11 
Size:	41.6 KB 
ID:	20841

    This connection allows you to easily get access to the 5V power, or to power the board by putting 5V on the VIN pin

  3. #3
    Junior Member
    Join Date
    Jul 2020
    Posts
    6
    Thank You!

  4. #4
    Junior Member
    Join Date
    May 2020
    Posts
    7
    Thanks for the schematic!

    I'm trying to attach two ideal diodes (MAX40200) so either Vin or Vusb can supply power without issues.

    I appreciate the information.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •