Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 4 of 4

Thread: Teensy 4.1 connector drawing

  1. #1
    Junior Member
    Join Date
    Jul 2020
    Posts
    2

    Teensy 4.1 connector drawing

    I am designing a base board to solder my Teensy 4.1 on. I could not find a drawing of the pin locations for the Ethernet and USB connectors. I need this so my holes will line up.

  2. #2
    Senior Member blackketter's Avatar
    Join Date
    May 2015
    Location
    San Francisco
    Posts
    289
    What CAD tool are you using?

    If you are using KiCAD to design your board, there's a footprint here: https://github.com/XenGi/teensy.pretty
    And one for Eagle here: https://forum.pjrc.com/threads/60348...l=1#post239490

  3. #3
    Senior Member
    Join Date
    Mar 2016
    Posts
    202
    If using Eagle there's a library for it here. Look for teensy.4.1.dist.zip

  4. #4
    Junior Member
    Join Date
    Jul 2020
    Posts
    2

    Thank you

    Quote Originally Posted by blackketter View Post
    What CAD tool are you using?

    If you are using KiCAD to design your board, there's a footprint here: https://github.com/XenGi/teensy.pretty
    And one for Eagle here: https://forum.pjrc.com/threads/60348...l=1#post239490
    Perfect, KiCAD is human readable. Got my footprint in Osmond PCB.

    Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •