Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Processors not on a board

  1. #1

    Processors not on a board

    Paul:

    Can one purchase from you the MK20DX256VLH7 microprocessor used in the Teensy3.2 (or any of the other MPs) programed with the arduino bootloader to use in my own designs?

    Thanks

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    23,051
    Yes. This is the page you want.

    https://www.pjrc.com/store/ic_mkl02.html

    All of the bootloader code is stored in the MKL02 chip, so you buy that chip from PJRC and pair it with a blank MK20DX256VLH7, which you can buy from Digikey, Mouser, Avnet, Arrow or any other distributor that sells it.

  3. #3
    Senior Member
    Join Date
    Apr 2013
    Posts
    1,936
    The main CPU is not where the bootloader code resides, it is in the separate bootloader IC available: https://www.pjrc.com/store/ic_mkl02.html

    If doing a custom design, see notes at the bottom of the thread and more recent forum threads on some of the gotchas is this sort of thing.

    And yes, if you are really confident that your design will never need new firmware it is possible to put a bootloader on some sort of programing module and just use it to program the entire production run.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •