Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: UDP Ethernet Connection to the Behringer X-Touch

  1. #1

    UDP Ethernet Connection to the Behringer X-Touch

    I want to build a midi controller. As a interface I would want to use the Behringer X-Touch, which has motor faders, displays and encoders.

    Based on the attached pdf it seems that the X-Touch and its faders, encoders and displayed can be controlled via a UDP connection and network messages. The controller has a Ethernet port.

    Should ia direct UDP connection to it via Teensy 4.1 and itís Ethnernet port work or do I miss something?

    http://www.budgetfeatures.com/XctlDO...uch%20V1.0.pdf

  2. #2
    Senior Member vjmuzik's Avatar
    Join Date
    Apr 2017
    Posts
    601
    Yes you can, it uses rtpMIDI and there already happens to be a library for it that works with the Teensy: https://github.com/lathoub/Arduino-AppleMIDI-Library
    I've only tested this on a Macbook with the Macbook connecting to the Teensy 4.1, but the library does support the other direction if you connect to a known IP Address it should have no problems connecting to the Behringer standalone.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •