Hello all,
I've noticed some weird behavior using the teensy_loader_cli. If I use the cli to load a program built for the teensy to be in "Serial" mode, and then try to send something out to the teensy through the serial port like "echo "hello" > /dev/ttyACM0, it puts the teensy into the hidraw mode like its waiting for code to be uploaded. Very odd.
This does not happen on my linux laptop, but does when its run on the ARM devices that we are actually deploying this to.
Any help here would be appreciated, let me know if more info is necessary.
Thanks,
Alex
I've noticed some weird behavior using the teensy_loader_cli. If I use the cli to load a program built for the teensy to be in "Serial" mode, and then try to send something out to the teensy through the serial port like "echo "hello" > /dev/ttyACM0, it puts the teensy into the hidraw mode like its waiting for code to be uploaded. Very odd.
This does not happen on my linux laptop, but does when its run on the ARM devices that we are actually deploying this to.
Any help here would be appreciated, let me know if more info is necessary.
Thanks,
Alex