Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Teensy 3.6 and FTDI board

  1. #1
    Junior Member
    Join Date
    Feb 2020
    Posts
    16

    Teensy 3.6 and FTDI board

    Hello everyone,
    I am using teensy 3.6 and FTDI Board. When i try to connect Teensy 3.6 with FTDI Board doesn't work..In arduino ide it shows no teensy board was found to upload. can anyone help me out from this issue..i have installed driver for ftdi board and the connection was also looks good.


    Regards
    Prasanna

  2. #2
    Senior Member
    Join Date
    Dec 2016
    Location
    Montreal, Canada
    Posts
    3,454
    an fdti board can not be used to program teensy. You need to connect the usb cable directly from teensy to pc to program. fdti board only works for serial uarts, but they will NOT reprogram teensy

    the only reason it works on arduino is because Serial uart on pins 0 and 1 goto an fdti chip to the usb connector, so by attaching an fdti board to Serial still can reprogram, but it's different on Teensy as the uart does not share with the usb,they are independant, and USB is way faster flashing

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •