I'm still working my way through the RA8875 library .. But I'll ask anyway ... I currently am running an array (100 X 512).. a new line is added to the top of the array and the following rows get pushed down and the last row (row 100) gets dropped off...at this point the array is sent off to the RA8875... and of course everything comes to just short of a screaming halt ( well not really but it really slows up .. Given the choice > I would prefer to just send the new row to the ra8875 and bump the existing rows down on the display to allow for the new line..
for those that have more experience programming the ra8875, is there a function that will allow me to bump rows down on the RA8874 side of the equation then trying to write a full array to the display...
oh this is a graphics line that gets shifted not text...
So "schooling and guidance would be appreciated" .. and if there is a better method I'm all for it .Sort of a novice here...
Thanks in advance..
K
for those that have more experience programming the ra8875, is there a function that will allow me to bump rows down on the RA8874 side of the equation then trying to write a full array to the display...
oh this is a graphics line that gets shifted not text...
So "schooling and guidance would be appreciated" .. and if there is a better method I'm all for it .Sort of a novice here...
Thanks in advance..
K