Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 25 of 26

Thread: Teensy 3.2. (Code 43) error on Windows 10

Threaded View

  1. #1

    Teensy 3.2. (Code 43) error on Windows 10

    Hello. I just bought an original Teensy 3.2 , but I am having problem with usb error messages. I have tried what suggested to try here, but with no luck:

    https://www.pjrc.com/teensy/troubleshoot.html

    I have tried severla different cables and ports and hubs. No luck. Also different PC running windows.

    I have windows 10 x64

    As mentioned, tried also this :

    Physically disconnect the Teensy.
    Reboot your computer (complete power off is best)
    Make sure the Teensy Loader application is running.
    Hold the reset button down, before plugging in the USB cable.
    Plug the USB cable in while continuing to hold the button.
    After the cable is fully inserted, release the button.

    Nothing, no luck.

    I have loaded in arduino this code:


    Code:
    // https://forum.pjrc.com/threads/31518-Can-t-communicate-with-Teensy-3-2-through-Teensyduino?p=88073&viewfull=1#post88073
    #define qBlink() (digitalWriteFast(LED_BUILTIN, !digitalReadFast(LED_BUILTIN) ))  // Pin13 on T3.x & LC
    void setup() {
      Serial.begin(38400);
      pinMode(LED_BUILTIN, OUTPUT);
      digitalWrite(LED_BUILTIN, HIGH);
      while (!Serial && (millis() <= 4000))
        { qBlink(); delay(50); }
      Serial.print("\nSetup() OK :: millis()==");
      Serial.println(millis());
      Serial.println("\n" __FILE__ " " __DATE__ " " __TIME__);
    }
    
    elapsedMillis emilBlink;  // Teensy way to delay action without delay()
    int8_t loopCount = 0; // Print a NewLine periodically
    
    void loop() {
      if ( emilBlink > 1000 ) {
        qBlink();
        emilBlink = 0;
        Serial.print(".");
        loopCount += 1;
        if ( 40 < loopCount ) {
          loopCount = 0;
          Serial.println("!");
        }
      }
    }

    These are the error messages:


    00:27:21.635 (ports 5): Begin, version=1.53-beta3, high-res time
    00:27:21.635 (ports 5): LoadLibrary cfgmgr32 ok
    00:27:21.635 (ports 5): LoadLibrary ntdll ok
    00:27:21.637 (ports 5): callback 0024
    00:27:21.637 (ports 5): callback 0081
    00:27:21.639 (ports 5): callback 0083
    00:27:21.639 (ports 5): hWnd = 133238
    00:27:21.641 (ports 5): nothing new, skipping HID & Ports enum
    00:28:09.340 (post_compile 1): Begin, version=1.53-beta3, high-res time
    00:28:09.460 (loader): Teensy Loader 1.53-beta3, begin program
    00:28:09.499 (loader): Listening for remote control on port 3149
    00:28:09.500 (loader): initialized, showing main window
    00:28:09.509 (loader): remote connection 1328 opened
    00:28:09.510 (loader): remote cmd from 1328: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:28:09.510 (post_compile 1): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:28:09.511 (loader): remote cmd from 1328: "status"
    00:28:09.514 (loader): HID/win32: vid:046D pid:C31C ver:6400
    00:28:09.514 (loader): HID/win32: vid:046D pid:C31C ver:6400
    00:28:09.514 (loader): HID/win32: vid:046D pid:C31C ver:6400
    00:28:09.515 (loader): HID/win32: vid:05AC pid:0256 ver:0105
    00:28:09.516 (loader): HID/win32: vid:05AC pid:0256 ver:0105
    00:28:09.516 (loader): HID/win32: vid:046D pid:C52F ver:3000
    00:28:09.516 (loader): HID/win32: vid:046D pid:C52F ver:3000
    00:28:09.516 (loader): HID/win32: vid:05AC pid:0256 ver:0105
    00:28:09.517 (loader): HID/win32: vid:046D pid:C52F ver:3000
    00:28:09.517 (loader): remote cmd from 1328: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_133467\"
    00:28:09.517 (post_compile 1): Status: 0, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 76420\, BlinkWithoutDelay1.ino.hex
    00:28:09.517 (post_compile 1): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_133467\
    00:28:09.518 (loader): remote cmd from 1328: "file:BlinkWithoutDelay1.ino.hex"
    00:28:09.518 (post_compile 1): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:28:09.525 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:28:09.528 (loader): remote cmd from 1328: "status"
    00:28:09.530 (loader): remote cmd from 1328: "auto:on"
    00:28:09.530 (post_compile 1): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:28:09.530 (post_compile 1): Sending command: auto:on
    00:28:09.530 (post_compile 1): Disconnect
    00:28:09.553 (loader): remote connection 1328 closed
    00:28:09.703 (post_compile 2): Begin, version=1.53-beta3, high-res time
    00:28:09.703 (loader): remote connection 1336 opened
    00:28:09.704 (post_compile 2): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:28:09.704 (loader): remote cmd from 1336: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:28:09.704 (loader): remote cmd from 1336: "status"
    00:28:09.705 (loader): remote cmd from 1336: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_133467\"
    00:28:09.705 (loader): remote cmd from 1336: "file:BlinkWithoutDelay1.ino.hex"
    00:28:09.706 (post_compile 2): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:28:09.706 (post_compile 2): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_133467\
    00:28:09.706 (post_compile 2): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:28:09.712 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:28:09.723 (loader): remote cmd from 1336: "status"
    00:28:09.725 (post_compile 2): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:28:09.725 (post_compile 2): Disconnect
    00:28:09.739 (post_compile 3): Running teensy_reboot: "C:\Program Files (x86)\Arduino\hardware\teensy\..\tools\teensy_rebo ot.exe" teensy_reboot.exe "-board=TEENSY32" "-port=COM17" "-portlabel=(null)" "-portprotocol=(null)"
    00:28:09.741 (loader): remote connection 1336 closed
    00:28:09.741 (loader): remote connection 1336 opened
    00:28:09.750 (reboot 4): Begin, version=1.53-beta3, high-res time
    00:28:09.750 (reboot 4): location = COM17
    00:28:09.750 (reboot 4): portlabel = (null)
    00:28:09.750 (reboot 4): portprotocol = (null)
    00:28:09.750 (reboot 4): LoadLibrary cfgmgr32 ok
    00:28:09.750 (reboot 4): LoadLibrary ntdll ok
    00:28:09.751 (reboot 4): nothing new, skipping HID & Ports enum
    00:28:09.752 (loader): remote connection 1388 opened
    00:28:09.752 (reboot 4): Disconnect
    00:28:09.771 (loader): remote connection 1388 closed
    00:28:09.772 (loader): remote connection 1336 closed
    00:28:16.749 (loader): remote connection 1384 opened
    00:28:16.749 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:28:16.751 (ports 5): nothing new, skipping HID & Ports enum
    00:28:26.806 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:28:26.807 (ports 5): nothing new, skipping HID & Ports enum
    00:28:48.501 (ports 5): WM_DEVICECHANGE DBT_DEVICEARRIVAL
    00:28:48.503 (ports 5): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
    00:28:48.504 (ports 5): nothing new, skipping HID & Ports enum
    00:28:48.510 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:28:48.510 (ports 5): nothing new, skipping HID & Ports enum
    00:28:58.582 (ports 5): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:28:58.582 (ports 5): nothing new, skipping HID & Ports enum
    00:40:42.375 (loader): Auto Button event
    00:40:42.375 (loader): Auto mode: disabled
    00:40:47.621 (post_compile 6): Begin, version=1.53-beta3, high-res time
    00:40:47.622 (loader): remote connection 1696 opened
    00:40:47.622 (loader): remote cmd from 1696: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:40:47.622 (post_compile 6): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:40:47.623 (loader): remote cmd from 1696: "status"
    00:40:47.623 (loader): file changed
    00:40:47.630 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:40:47.634 (post_compile 6): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:40:47.634 (post_compile 6): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_133467\
    00:40:47.636 (loader): remote cmd from 1696: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_133467\"
    00:40:47.636 (loader): remote cmd from 1696: "file:BlinkWithoutDelay1.ino.hex"
    00:40:47.636 (post_compile 6): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:40:47.643 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:40:47.650 (loader): remote cmd from 1696: "status"
    00:40:47.651 (loader): remote cmd from 1696: "auto:on"
    00:40:47.651 (post_compile 6): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:40:47.651 (post_compile 6): Sending command: auto:on
    00:40:47.652 (post_compile 6): Disconnect
    00:40:47.671 (loader): remote connection 1696 closed
    00:40:47.814 (post_compile 7): Begin, version=1.53-beta3, high-res time
    00:40:47.814 (loader): remote connection 1696 opened
    00:40:47.814 (loader): remote cmd from 1696: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:40:47.814 (loader): remote cmd from 1696: "status"
    00:40:47.815 (post_compile 7): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:40:47.816 (loader): remote cmd from 1696: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_133467\"
    00:40:47.816 (loader): remote cmd from 1696: "file:BlinkWithoutDelay1.ino.hex"
    00:40:47.816 (post_compile 7): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:40:47.816 (post_compile 7): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_133467\
    00:40:47.816 (post_compile 7): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:40:47.823 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:40:47.831 (loader): remote cmd from 1696: "status"
    00:40:47.833 (post_compile 7): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:40:47.833 (post_compile 7): Disconnect
    00:40:47.843 (loader): remote connection 1696 closed
    00:40:47.844 (post_compile 8): Running teensy_reboot: "C:\Program Files (x86)\Arduino\hardware\teensy\..\tools\teensy_rebo ot.exe" teensy_reboot.exe "-board=TEENSY32" "-port=COM17" "-portlabel=(null)" "-portprotocol=(null)"
    00:40:47.844 (loader): remote connection 1696 opened
    00:40:47.850 (reboot 9): Begin, version=1.53-beta3, high-res time
    00:40:47.850 (reboot 9): location = COM17
    00:40:47.850 (reboot 9): portlabel = (null)
    00:40:47.850 (reboot 9): portprotocol = (null)
    00:40:47.850 (reboot 9): LoadLibrary cfgmgr32 ok
    00:40:47.850 (reboot 9): LoadLibrary ntdll ok
    00:40:47.852 (reboot 9): nothing new, skipping HID & Ports enum
    00:40:47.852 (loader): remote connection 1608 opened
    00:40:47.853 (reboot 9): Disconnect
    00:40:47.875 (loader): remote connection 1608 closed
    00:40:47.876 (loader): remote connection 1696 closed
    00:41:00.577 (post_compile 10): Begin, version=1.53-beta3, high-res time
    00:41:00.578 (loader): remote connection 1532 opened
    00:41:00.579 (loader): remote cmd from 1532: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:41:00.579 (loader): remote cmd from 1532: "status"
    00:41:00.579 (loader): file changed
    00:41:00.579 (post_compile 10): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:41:00.586 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:41:00.590 (post_compile 10): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:41:00.590 (post_compile 10): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_133467\
    00:41:00.593 (loader): remote cmd from 1532: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_133467\"
    00:41:00.593 (loader): remote cmd from 1532: "file:BlinkWithoutDelay1.ino.hex"
    00:41:00.593 (post_compile 10): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:41:00.600 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:41:00.605 (loader): remote cmd from 1532: "status"
    00:41:00.607 (post_compile 10): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:41:00.607 (post_compile 10): Disconnect
    00:41:00.620 (loader): remote connection 1532 closed
    00:41:13.444 (loader): Auto Button event
    00:41:13.444 (loader): Auto mode: disabled
    00:41:16.600 (post_compile 11): Begin, version=1.53-beta3, high-res time
    00:41:16.600 (loader): remote connection 1732 opened
    00:41:16.600 (loader): remote cmd from 1732: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:41:16.601 (post_compile 11): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:41:16.601 (loader): remote cmd from 1732: "status"
    00:41:16.601 (loader): file changed
    00:41:16.608 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:41:16.612 (post_compile 11): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:41:16.612 (post_compile 11): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_133467\
    00:41:16.617 (loader): remote cmd from 1732: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_133467\"
    00:41:16.617 (loader): remote cmd from 1732: "file:BlinkWithoutDelay1.ino.hex"
    00:41:16.617 (post_compile 11): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:41:16.624 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:41:16.630 (loader): remote cmd from 1732: "status"
    00:41:16.631 (loader): remote cmd from 1732: "auto:on"
    00:41:16.631 (post_compile 11): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:41:16.631 (post_compile 11): Sending command: auto:on
    00:41:16.632 (post_compile 11): Disconnect
    00:41:16.650 (loader): remote connection 1732 closed
    00:41:16.790 (post_compile 12): Begin, version=1.53-beta3, high-res time
    00:41:16.791 (loader): remote connection 1716 opened
    00:41:16.791 (loader): remote cmd from 1716: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:41:16.792 (post_compile 12): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:41:16.792 (loader): remote cmd from 1716: "status"
    00:41:16.793 (loader): remote cmd from 1716: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_133467\"
    00:41:16.793 (loader): remote cmd from 1716: "file:BlinkWithoutDelay1.ino.hex"
    00:41:16.793 (post_compile 12): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:41:16.793 (post_compile 12): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_133467\
    00:41:16.793 (post_compile 12): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:41:16.800 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:41:16.811 (loader): remote cmd from 1716: "status"
    00:41:16.812 (post_compile 12): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:41:16.812 (post_compile 12): Disconnect
    00:41:16.823 (loader): remote connection 1716 closed
    00:41:16.823 (loader): remote connection 1720 opened
    00:41:16.823 (post_compile 13): Running teensy_reboot: "C:\Program Files (x86)\Arduino\hardware\teensy\..\tools\teensy_rebo ot.exe" teensy_reboot.exe "-board=TEENSY32" "-port=COM17" "-portlabel=(null)" "-portprotocol=(null)"
    00:41:16.829 (reboot 14): Begin, version=1.53-beta3, high-res time
    00:41:16.829 (reboot 14): location = COM17
    00:41:16.829 (reboot 14): portlabel = (null)
    00:41:16.829 (reboot 14): portprotocol = (null)
    00:41:16.829 (reboot 14): LoadLibrary cfgmgr32 ok
    00:41:16.829 (reboot 14): LoadLibrary ntdll ok
    00:41:16.830 (reboot 14): nothing new, skipping HID & Ports enum
    00:41:16.831 (loader): remote connection 1724 opened
    00:41:16.831 (reboot 14): Disconnect
    00:41:16.853 (loader): remote connection 1724 closed
    00:41:16.854 (loader): remote connection 1720 closed
    00:42:07.676 (loader): Auto Button event
    00:42:07.676 (loader): Auto mode: disabled
    00:45:47.733 (loader): remote connection 1384 closed
    00:45:47.738 (loader): file changed
    00:46:12.543 (ports 15): Begin, version=1.53-beta3, high-res time
    00:46:12.543 (ports 15): LoadLibrary cfgmgr32 ok
    00:46:12.543 (ports 15): LoadLibrary ntdll ok
    00:46:12.545 (ports 15): callback 0024
    00:46:12.545 (ports 15): callback 0081
    00:46:12.546 (ports 15): callback 0083
    00:46:12.546 (ports 15): hWnd = 526768
    00:46:12.547 (loader): remote connection 1464 opened
    00:46:12.549 (ports 15): nothing new, skipping HID & Ports enum
    00:46:29.020 (loader): remote connection 1700 opened
    00:46:29.020 (post_compile 16): Begin, version=1.53-beta3, high-res time
    00:46:29.021 (loader): remote cmd from 1700: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:46:29.021 (loader): remote cmd from 1700: "status"
    00:46:29.021 (post_compile 16): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:46:29.022 (loader): remote cmd from 1700: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:46:29.022 (loader): remote cmd from 1700: "file:BlinkWithoutDelay1.ino.hex"
    00:46:29.023 (post_compile 16): Status: 0, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_1 33467\, BlinkWithoutDelay1.ino.hex
    00:46:29.023 (post_compile 16): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:46:29.023 (post_compile 16): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:46:29.029 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:46:29.035 (loader): remote cmd from 1700: "status"
    00:46:29.036 (loader): remote cmd from 1700: "auto:on"
    00:46:29.036 (post_compile 16): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:46:29.036 (post_compile 16): Sending command: auto:on
    00:46:29.037 (post_compile 16): Disconnect
    00:46:29.062 (loader): remote connection 1700 closed
    00:46:29.200 (post_compile 17): Begin, version=1.53-beta3, high-res time
    00:46:29.201 (loader): remote connection 1704 opened
    00:46:29.201 (loader): remote cmd from 1704: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:46:29.201 (loader): remote cmd from 1704: "status"
    00:46:29.201 (post_compile 17): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:46:29.203 (loader): remote cmd from 1704: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:46:29.203 (loader): remote cmd from 1704: "file:BlinkWithoutDelay1.ino.hex"
    00:46:29.203 (post_compile 17): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:46:29.203 (post_compile 17): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:46:29.203 (post_compile 17): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:46:29.210 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:46:29.218 (loader): remote cmd from 1704: "status"
    00:46:29.219 (post_compile 17): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:46:29.219 (post_compile 17): Disconnect
    00:46:29.232 (loader): remote connection 1704 closed
    00:46:29.232 (loader): remote connection 1524 opened
    00:46:29.232 (post_compile 18): Running teensy_reboot: "C:\Program Files (x86)\Arduino\hardware\teensy\..\tools\teensy_rebo ot.exe" teensy_reboot.exe "-board=TEENSY32" "-port=COM17" "-portlabel=(null)" "-portprotocol=(null)"
    00:46:29.237 (reboot 19): Begin, version=1.53-beta3, high-res time
    00:46:29.237 (reboot 19): location = COM17
    00:46:29.237 (reboot 19): portlabel = (null)
    00:46:29.237 (reboot 19): portprotocol = (null)
    00:46:29.237 (reboot 19): LoadLibrary cfgmgr32 ok
    00:46:29.237 (reboot 19): LoadLibrary ntdll ok
    00:46:29.238 (reboot 19): nothing new, skipping HID & Ports enum
    00:46:29.239 (loader): remote connection 1600 opened
    00:46:29.239 (reboot 19): Disconnect
    00:46:29.263 (loader): remote connection 1600 closed
    00:46:29.264 (loader): remote connection 1524 closed
    00:46:34.022 (loader): Auto Button event
    00:46:34.022 (loader): Auto mode: disabled
    00:49:54.240 (loader): file changed
    00:49:54.247 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:49:54.252 (post_compile 20): Begin, version=1.53-beta3, high-res time
    00:49:54.256 (loader): remote connection 1588 opened
    00:49:54.257 (post_compile 20): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:49:54.257 (loader): remote cmd from 1588: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:49:54.257 (loader): remote cmd from 1588: "status"
    00:49:54.258 (loader): remote cmd from 1588: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:49:54.258 (loader): remote cmd from 1588: "file:BlinkWithoutDelay1.ino.hex"
    00:49:54.259 (post_compile 20): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:49:54.259 (post_compile 20): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:49:54.259 (post_compile 20): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:49:54.265 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:49:54.272 (loader): remote cmd from 1588: "status"
    00:49:54.273 (loader): remote cmd from 1588: "auto:on"
    00:49:54.273 (post_compile 20): Status: 1, 0, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:49:54.273 (post_compile 20): Sending command: auto:on
    00:49:54.274 (post_compile 20): Disconnect
    00:49:54.292 (loader): remote connection 1588 closed
    00:49:54.429 (post_compile 21): Begin, version=1.53-beta3, high-res time
    00:49:54.429 (loader): remote connection 1592 opened
    00:49:54.430 (post_compile 21): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:49:54.430 (loader): remote cmd from 1592: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:49:54.430 (loader): remote cmd from 1592: "status"
    00:49:54.431 (loader): remote cmd from 1592: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:49:54.431 (loader): remote cmd from 1592: "file:BlinkWithoutDelay1.ino.hex"
    00:49:54.431 (post_compile 21): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:49:54.431 (post_compile 21): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:49:54.431 (post_compile 21): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:49:54.438 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:49:54.444 (loader): remote cmd from 1592: "status"
    00:49:54.445 (post_compile 21): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:49:54.445 (post_compile 21): Disconnect
    00:49:54.467 (loader): remote connection 1592 closed
    00:49:54.467 (loader): remote connection 1564 opened
    00:49:54.467 (post_compile 22): Running teensy_reboot: "C:\Program Files (x86)\Arduino\hardware\teensy\..\tools\teensy_rebo ot.exe" teensy_reboot.exe "-board=TEENSY32" "-port=COM17" "-portlabel=(null)" "-portprotocol=(null)"
    00:49:54.472 (reboot 23): Begin, version=1.53-beta3, high-res time
    00:49:54.472 (reboot 23): location = COM17
    00:49:54.472 (reboot 23): portlabel = (null)
    00:49:54.472 (reboot 23): portprotocol = (null)
    00:49:54.472 (reboot 23): LoadLibrary cfgmgr32 ok
    00:49:54.472 (reboot 23): LoadLibrary ntdll ok
    00:49:54.473 (reboot 23): nothing new, skipping HID & Ports enum
    00:49:54.474 (loader): remote connection 1568 opened
    00:49:54.474 (reboot 23): Disconnect
    00:49:54.498 (loader): remote connection 1568 closed
    00:49:54.499 (loader): remote connection 1564 closed
    00:50:43.101 (ports 15): WM_DEVICECHANGE DBT_DEVICEARRIVAL
    00:50:43.101 (ports 15): nothing new, skipping HID & Ports enum
    00:50:43.101 (ports 15): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
    00:50:43.102 (ports 15): nothing new, skipping HID & Ports enum
    00:50:43.110 (ports 15): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:50:43.111 (ports 15): nothing new, skipping HID & Ports enum
    00:50:43.149 (ports 15): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:50:43.149 (ports 15): nothing new, skipping HID & Ports enum
    00:52:50.757 (loader): Verbose Info event
    00:53:00.699 (post_compile 24): Begin, version=1.53-beta3, high-res time
    00:53:00.700 (loader): remote connection 748 opened
    00:53:00.703 (loader): remote cmd from 748: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:53:00.703 (post_compile 24): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:53:00.710 (loader): remote cmd from 748: "status"
    00:53:00.717 (loader): file changed
    00:53:00.731 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:53:00.740 (post_compile 24): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:00.740 (post_compile 24): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:53:00.747 (loader): remote cmd from 748: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:53:00.751 (loader): remote cmd from 748: "file:BlinkWithoutDelay1.ino.hex"
    00:53:00.751 (post_compile 24): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:53:00.766 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:53:00.773 (loader): remote cmd from 748: "status"
    00:53:00.780 (post_compile 24): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:00.780 (post_compile 24): Disconnect
    00:53:00.808 (loader): remote connection 748 closed
    00:53:00.928 (post_compile 25): Begin, version=1.53-beta3, high-res time
    00:53:00.929 (loader): remote connection 748 opened
    00:53:00.933 (loader): remote cmd from 748: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:53:00.933 (post_compile 25): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:53:00.939 (loader): remote cmd from 748: "status"
    00:53:00.947 (loader): remote cmd from 748: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:53:00.947 (post_compile 25): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:00.947 (post_compile 25): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:53:00.957 (loader): remote cmd from 748: "file:BlinkWithoutDelay1.ino.hex"
    00:53:00.957 (post_compile 25): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:53:00.976 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:53:00.991 (loader): remote cmd from 748: "status"
    00:53:00.999 (post_compile 25): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:00.999 (post_compile 25): Disconnect
    00:53:01.012 (post_compile 26): Running teensy_reboot: "C:\Program Files (x86)\Arduino\hardware\teensy\..\tools\teensy_rebo ot.exe" teensy_reboot.exe "-board=TEENSY32" "-port=COM17" "-portlabel=(null)" "-portprotocol=(null)"
    00:53:01.020 (loader): remote connection 748 closed
    00:53:01.040 (loader): remote connection 748 opened
    00:53:01.052 (reboot 27): Begin, version=1.53-beta3, high-res time
    00:53:01.052 (reboot 27): location = COM17
    00:53:01.052 (reboot 27): portlabel = (null)
    00:53:01.052 (reboot 27): portprotocol = (null)
    00:53:01.052 (reboot 27): LoadLibrary cfgmgr32 ok
    00:53:01.052 (reboot 27): LoadLibrary ntdll ok
    00:53:01.053 (reboot 27): nothing new, skipping HID & Ports enum
    00:53:01.070 (loader): remote connection 732 opened
    00:53:01.080 (reboot 27): Disconnect
    00:53:01.108 (loader): remote connection 732 closed
    00:53:01.124 (loader): remote connection 748 closed
    00:53:39.048 (post_compile 28): Begin, version=1.53-beta3, high-res time
    00:53:39.049 (loader): remote connection 1752 opened
    00:53:39.052 (loader): remote cmd from 1752: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:53:39.053 (post_compile 28): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:53:39.064 (loader): remote cmd from 1752: "status"
    00:53:39.067 (loader): file changed
    00:53:39.085 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:53:39.093 (post_compile 28): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:39.093 (post_compile 28): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:53:39.100 (loader): remote cmd from 1752: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:53:39.108 (loader): remote cmd from 1752: "file:BlinkWithoutDelay1.ino.hex"
    00:53:39.109 (post_compile 28): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:53:39.124 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:53:39.137 (loader): remote cmd from 1752: "status"
    00:53:39.143 (post_compile 28): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:39.143 (post_compile 28): Disconnect
    00:53:39.161 (loader): remote connection 1752 closed
    00:53:39.293 (post_compile 29): Begin, version=1.53-beta3, high-res time
    00:53:39.294 (loader): remote connection 1752 opened
    00:53:39.297 (post_compile 29): Sending command: comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)
    00:53:39.297 (loader): remote cmd from 1752: "comment: Teensyduino 1.53-beta3 - WINDOWS (teensy_post_compile)"
    00:53:39.305 (loader): remote cmd from 1752: "status"
    00:53:39.315 (loader): remote cmd from 1752: "dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bu ild_308338\"
    00:53:39.316 (post_compile 29): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:39.316 (post_compile 29): Sending command: dir:C:\Users\MARCOB\AppData\Local\Temp\arduino_bui ld_308338\
    00:53:39.326 (loader): remote cmd from 1752: "file:BlinkWithoutDelay1.ino.hex"
    00:53:39.326 (post_compile 29): Sending command: file:BlinkWithoutDelay1.ino.hex
    00:53:39.338 (loader): File "BlinkWithoutDelay1.ino.hex". 12744 bytes, 20% used
    00:53:39.352 (loader): remote cmd from 1752: "status"
    00:53:39.357 (post_compile 29): Status: 1, 1, 0, 0, 0, 0, C:\Users\MARCOB\AppData\Local\Temp\arduino_build_3 08338\, BlinkWithoutDelay1.ino.hex
    00:53:39.357 (post_compile 29): Disconnect
    00:53:39.378 (post_compile 30): Running teensy_reboot: "C:\Program Files (x86)\Arduino\hardware\teensy\..\tools\teensy_rebo ot.exe" teensy_reboot.exe "-board=TEENSY32" "-port=COM17" "-portlabel=(null)" "-portprotocol=(null)"
    00:53:39.380 (loader): remote connection 1752 closed
    00:53:39.390 (loader): remote connection 1752 opened
    00:53:39.399 (reboot 31): Begin, version=1.53-beta3, high-res time
    00:53:39.399 (reboot 31): location = COM17
    00:53:39.399 (reboot 31): portlabel = (null)
    00:53:39.399 (reboot 31): portprotocol = (null)
    00:53:39.399 (reboot 31): LoadLibrary cfgmgr32 ok
    00:53:39.399 (reboot 31): LoadLibrary ntdll ok
    00:53:39.400 (reboot 31): nothing new, skipping HID & Ports enum
    00:53:39.412 (loader): remote connection 1756 opened
    00:53:39.423 (reboot 31): Disconnect
    00:53:39.447 (loader): remote connection 1756 closed
    00:53:39.453 (loader): remote connection 1752 closed
    00:53:42.654 (ports 15): WM_DEVICECHANGE DBT_DEVICEARRIVAL
    00:53:42.655 (ports 15): WM_DEVICECHANGE DBT_DEVICEREMOVECOMPLETE
    00:53:42.657 (ports 15): nothing new, skipping HID & Ports enum
    00:53:42.703 (ports 15): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:53:42.703 (ports 15): nothing new, skipping HID & Ports enum
    00:53:42.769 (ports 15): WM_DEVICECHANGE DBT_DEVNODES_CHANGED
    00:53:42.769 (ports 15): nothing new, skipping HID & Ports enum


    Click image for larger version. 

Name:	1.png 
Views:	15 
Size:	112.1 KB 
ID:	21643

    Click image for larger version. 

Name:	2.jpg 
Views:	11 
Size:	67.3 KB 
ID:	21644

    Please help.
    Last edited by defragster; 09-07-2020 at 08:45 AM. Reason: turn off smilies

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •