Hello,
I just need to store 32 bit to keep track of a counter. This counter is written relatively often to the eeprom, therefore I would like to increase the write endurance on the T4.
I checked several threads in the forum like https://forum.pjrc.com/threads/57377?p=214566&viewfull=1#post214566 and https://forum.pjrc.com/threads/52433-Teensy-EEPROM-location-is-it-static-regardless-of-program-data but those threads mainly deal with T3.x.
I checked eeprom.c/eeprom.h and the only possible values to tweak are E2END,FLASH_BASEADDR and FLASH_SECTORS. No EEPARTITION or EEESPLIT or similar as stated in the above mentioned threads.
So I'm a bit lost here. How can I increase the write endurance/wear leveling on the T4 when I just need to store 4 bytes?
Thanks in advance
Michael
I just need to store 32 bit to keep track of a counter. This counter is written relatively often to the eeprom, therefore I would like to increase the write endurance on the T4.
I checked several threads in the forum like https://forum.pjrc.com/threads/57377?p=214566&viewfull=1#post214566 and https://forum.pjrc.com/threads/52433-Teensy-EEPROM-location-is-it-static-regardless-of-program-data but those threads mainly deal with T3.x.
I checked eeprom.c/eeprom.h and the only possible values to tweak are E2END,FLASH_BASEADDR and FLASH_SECTORS. No EEPARTITION or EEESPLIT or similar as stated in the above mentioned threads.
So I'm a bit lost here. How can I increase the write endurance/wear leveling on the T4 when I just need to store 4 bytes?
Thanks in advance
Michael