Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Using High Speed Encoders

  1. #1
    Junior Member
    Join Date
    Sep 2020
    Posts
    1

    Using High Speed Encoders

    Hi,
    I am new to the forum as well as on the hardware, I have some knowledge of Arduino. and stuck in one of the tasks.
    Here is the detail

    I am using Tamagawa encoder 2500p8 which is spinning with a motor on 1500RPM.
    there are some voltages supplied on a port/pin of the hardware.
    I want to read those voltages while encoder spinning.

    I tried it Arduino but somehow it fails more than 1000RPM and when the cable length is greater than a meter.

    After a search, I think that Teensy could help me in achieving this.

    I would like to know which board I should go for, and what pattern I should follow

    Thanks

  2. #2
    Senior Member
    Join Date
    Jul 2020
    Posts
    539
    Do you have a link to the datasheet for this encoder?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •