Hi,
I wanted to know if teensy 4.1 was compatible with teensy 3.6 at the pin level.
Can I replace the teensy 3.6 with a teensy 4.1 while continuing to use my programs
without changing the hardware pins for the spinnaker for example my tft lcd, serial ...
Thanks for your help.
I wanted to know if teensy 4.1 was compatible with teensy 3.6 at the pin level.
Can I replace the teensy 3.6 with a teensy 4.1 while continuing to use my programs
without changing the hardware pins for the spinnaker for example my tft lcd, serial ...
Thanks for your help.