Teensy 4.1 ethernet pin hole locations / mechanical drawing

[mamdos]

Hi,

I'm designing a baseboard for the Teensy 4.1 that makes use of the native ethernet pins which are broken out to the center of the teensy. I need to know the location of the 2x3 2mm pitch header with respect to the GPIO pins. I couldn't find that info on https://www.pjrc.com/teensy/dimensions.html

[PaulStoffregen]

I've updated the dimensions page.

And here's the dimensions for Teensy 4.1.

[mamdos]

Appreciate the prompt support, Paul.