Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 3 of 3

Thread: Teensy 4.1 ethernet pin hole locations / mechanical drawing

  1. #1
    Junior Member
    Join Date
    Sep 2020
    Posts
    2

    Teensy 4.1 ethernet pin hole locations / mechanical drawing

    Hi,

    I'm designing a baseboard for the Teensy 4.1 that makes use of the native ethernet pins which are broken out to the center of the teensy. I need to know the location of the 2x3 2mm pitch header with respect to the GPIO pins. I couldn't find that info on https://www.pjrc.com/teensy/dimensions.html

  2. #2
    Senior Member PaulStoffregen's Avatar
    Join Date
    Nov 2012
    Posts
    22,712
    I've updated the dimensions page.

    And here's the dimensions for Teensy 4.1.


  3. #3
    Junior Member
    Join Date
    Sep 2020
    Posts
    2
    Appreciate the prompt support, Paul.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •