Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Windows USB Keyboard data capture on Teensy 3.6

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Location
    Coconut Creek, FL USA
    Posts
    1

    Windows USB Keyboard data capture on Teensy 3.6

    I have limited knowledge of Arduino and no knowledge about the Teensy 3.6 although I have one and set it up already. Someone told me that to take input directly from a Windows USB keyboard the Teensy 3.6 is the way to go.

    Where can I find full documentation on connecting devices such as a standard USB keyboard to a Teensy?
    I want to store the captured keystrokes, and eventually output the stored data to a Windows computer.

    I need USB Keyboard in and USB Keyboard out to a Windows PC.

    I don't have to use the Teensy 3.6. I am open to anything. Can you point me to where I can find the technical information I need to interface a standard keyboard to a Teensy 3.6?

    If you have any details such as basic code and i/o pins to receive keyboard data and simulate keyboard data out to a Windows PC you'd like to share that would be wonderful. Thanks in advance!

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    13,473
    If keyboard is a USB Device - it can connect to the internal pins on T_3.6 for USBHost usage with proper cable.

    That page shows the needed cable and pin wiring is on the card or other pages.

    Library USBHost_t36 included with TeensyDuino should have a sample to connect a keyboard. If not it must be somewhere in the forum. If going through a hub it will need a hub element.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •