Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 2 of 2

Thread: Reproducing Teensy 3.6

  1. #1

    Reproducing Teensy 3.6

    If I were to re-produce the Teensy 3.6 inside a custom built design - what would I need to procure from PJRC - to get my project up and running.

    Udayan Mallik

  2. #2
    Senior Member+ defragster's Avatar
    Join Date
    Feb 2015
    Posts
    12,760
    Paul has a T_3.6 reference board posted on OSHPARK. That and other details are here in the forum somewhere - and perhaps even on the page where the required Bootloader chips on PJRC.com are made available.

    Perhaps finding the reference OSHPark board and deciding it is something doable and possible with resources you have to proceed to design and build and buying the Bootloader Chip for DIY Teensy LC, 3.2, 3.5, 3.6 Projects


    Teensy 3.6 DIY Reference Board

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •