Reproducing Teensy 3.6

Udayan.Mallik

New member
If I were to re-produce the Teensy 3.6 inside a custom built design - what would I need to procure from PJRC - to get my project up and running.

Udayan Mallik
 
Paul has a T_3.6 reference board posted on OSHPARK. That and other details are here in the forum somewhere - and perhaps even on the page where the required Bootloader chips on PJRC.com are made available.

Perhaps finding the reference OSHPark board and deciding it is something doable and possible with resources you have to proceed to design and build and buying the Bootloader Chip for DIY Teensy LC, 3.2, 3.5, 3.6 Projects


Teensy 3.6 DIY Reference Board
 
Back
Top