Help needed Teensy Convolution SDR T4 and Audio Board Rev D
Dear all
I need help! I could compile the software menus are working as they should frontend is OK wit correct frequencies. But I am stuck with linking the T4.0 and audio board SGTL5000 rev D Teensy sits on audio board
with a scope on outputs of t4 I see following:
on pin 23MCLK Clock I have 45.157 Mhz I have the 11.289 for a couple of milliseconds after booting
on pin 20LRCLK I have 176Khz
on pin 21BCLK I have 11.289Mhz
Looks as everything is 4 times requested frequency!!!
Did I miss something to (un)comment? wrong audio library? using teenduino one
Any clues widely appreciated with many thaks
73,s Hubert F6DUK
Dear all
I need help! I could compile the software menus are working as they should frontend is OK wit correct frequencies. But I am stuck with linking the T4.0 and audio board SGTL5000 rev D Teensy sits on audio board
with a scope on outputs of t4 I see following:
on pin 23MCLK Clock I have 45.157 Mhz I have the 11.289 for a couple of milliseconds after booting
on pin 20LRCLK I have 176Khz
on pin 21BCLK I have 11.289Mhz
Looks as everything is 4 times requested frequency!!!
Did I miss something to (un)comment? wrong audio library? using teenduino one
Any clues widely appreciated with many thaks
73,s Hubert F6DUK
Last edited: