jessejay356
Member
I designed an remote control John Deere riding mower using a Teensy 3.2 for the main processor. I'm using a Pololu Simple Motor Controller G2 18v15 to drive the steering motor and linear actuator for the brakes. If you look closely you can see the Teensy in the middle of this picture on the JRover board.
This project is part of a bigger project to build an fully autonomous riding mower and push mower. For more details on this project and my future plans you can visit this blog post on Sparkfun.com.
This project is part of a bigger project to build an fully autonomous riding mower and push mower. For more details on this project and my future plans you can visit this blog post on Sparkfun.com.