Any change on this subject?
Python + Teensy4.1 would be my preferred solution to create a remote IOTdevice.
Looks like there is CircuitPython for Teensy 4.1. Here is the hex file:
https://circuitpython.org/board/teensy41/
Does the teensy loader use drag and drop for hex files?
No. You have to use the Teensy loader to load the hex file.
Be sure to check whether CP supports the Teensy 4.1 ethernet.
You can also open the file using the toolbar button, or using drag-and-drop onto the upper portion of the window.
Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.
Press any key to enter the REPL. Use CTRL-D to reload.
Adafruit CircuitPython 6.3.0 on 2021-06-01; Teensy 4.1 with IMXRT1062DVJ6A
code.py output:
Hello World
Code done running.
Press any key to enter the REPL. Use CTRL-D to reload.
Adafruit CircuitPython 6.3.0 on 2021-06-01; Teensy 4.1 with IMXRT1062DVJ6A
>>>