I'm trying to reprogram a teensy remotely (ssh'd in) however i is not working. Though when I tried it on my machine it worked fine
Bus 005 Device 016: ID 16c0:0483 Van Ooijen Technische Informatica Teensyduino Serial
/dev/ttyACM0 - Teensyduino_USB_Serial_7573920
$ teensy_loader_cli -s --mcu=TEENSY40 GPIO.ino.TEENSY40.hex
Unable to soft reboot with USB error: error sending control message: Broken pipe
However i tried various options: -s, -r etc. Nothing worked. And now lsusb doesn't see it. I'm stuck and the button is out of reach...
Bus 005 Device 016: ID 16c0:0483 Van Ooijen Technische Informatica Teensyduino Serial
/dev/ttyACM0 - Teensyduino_USB_Serial_7573920
$ teensy_loader_cli -s --mcu=TEENSY40 GPIO.ino.TEENSY40.hex
Unable to soft reboot with USB error: error sending control message: Broken pipe
However i tried various options: -s, -r etc. Nothing worked. And now lsusb doesn't see it. I'm stuck and the button is out of reach...
Last edited: