KD0RC
Well-known member
I recently completed a project using a Teensy 4.1. Works great. A friend of mine duplicated it. Also works great. Another person is duplicating it but can't get the hex file to load. Hovering the mouse over the file name in Teensy.exe gives the message filename.hex (too large!) The verbose information says File contains data beyond chip size, yikes!
Only the one person cannot load the file, so I am wondering what factors might cause this. Could it be a bad USB cable? We have tried rebooting, loading from a fresh copy and resetting the Teensy back to the blink file using the 15 second programming button press trick.
Here is a link to the file on GitHub.
https://github.com/KD0RC/Teensy-Maestro-for-Flex-6000-radios/releases/tag/V1.008
Thanks for any help,
Len
Only the one person cannot load the file, so I am wondering what factors might cause this. Could it be a bad USB cable? We have tried rebooting, loading from a fresh copy and resetting the Teensy back to the blink file using the 15 second programming button press trick.
Here is a link to the file on GitHub.
https://github.com/KD0RC/Teensy-Maestro-for-Flex-6000-radios/releases/tag/V1.008
Thanks for any help,
Len