Due to some fairly tight physical constraints, I need to use a fairly small battery for my RTC. 20mm, 12mm and even 10mm are all too large and I'm looking at using a 6.8mm ML621 which is a rechargeable 5mah. Rough calculations suggest this should last around 100 days for the RTC, which is fine as this will rarely go 100 days without use, but means I need to ensure that I can charge it when the unit powers on.

Panasonics recommended charging circuit is fairly straight forward, just a Schottky to drop the voltage (Max charge voltage on the battery is 3.2v) and a resistor of specified value, so I was hoping to use something like this
Click image for larger version. 

Name:	Screen Shot 2021-01-21 at 9.59.11 am.png 
Views:	17 
Size:	20.5 KB 
ID:	23391

I know there is a diode already on the 3v3 -> VBat line though and just wanted to make this wasn't going to interfere with anything that's already happening on that circuit. Does this setup seem reasonable?