Forum Rule: Always post complete source code & details to reproduce any issue!
Results 1 to 6 of 6

Thread: Using Teensy with Atmel Studio

  1. #1
    Junior Member
    Join Date
    Dec 2012
    Posts
    2

    Using Teensy with Atmel Studio

    Hi everyone,

    i don't know if anyone here uses Atmel Studio for Development, but because there is no tutorial on how to set up Atmel Studio with Teensy, i created one.

    http://hardliner-it.blogspot.co.at/2...d-running.html

    best regards
    steve

    P.S.: Here is the Link, for the ATMELGitSccProvider.vsix. An extension, to make git accessible within Atmel Studio.
    Last edited by hardliner66; 12-13-2012 at 09:42 AM.

  2. #2
    Junior Member
    Join Date
    Dec 2012
    Posts
    6
    Quote Originally Posted by hardliner66 View Post
    Hi everyone,
    i don't know if anyone here uses Atmel Studio for Development, but because there is no tutorial on how to set up Atmel Studio with Teensy, i created one.
    I'm new so this will be very helpful, but will it all work with Teensy3? What changes are needed?

  3. #3
    Junior Member
    Join Date
    Nov 2012
    Posts
    2
    Quote Originally Posted by denz View Post
    I'm new so this will be very helpful, but will it all work with Teensy3? What changes are needed?
    I doubt it would be possible to get it to work with the Teensy3, as it does not use an Atmel chip as it's base. Likely you'll want to look at other IDEs if you don't want to use the teensyduino one. I haven't tried to find one yet so I don't know what might be possible.

  4. #4
    Junior Member
    Join Date
    Dec 2012
    Posts
    6
    Ah, that makes sense. For some reason I thought this was an Atmel ARM until today.

  5. #5
    Junior Member Cas55's Avatar
    Join Date
    Jun 2013
    Location
    Rotterdam, The Netherlands
    Posts
    3

    Visual Micro

    I like the VisualMicro plug-in for Atmel Visual Studio. It is supporting the Teensy2 and 3, http://www.visualmicro.com/page/Teen...al-Studio.aspx

    I had difficulties to get it working with the Teensy3, although it worked fine on an Arduino UNO board. I like the possibilities to edit and debug the sketches. I'm looking for some help to get this VisualMicro plug-in Configured for a Teensy Project.

    With help of Tim Leek of VisualMicro I managed to get a demo sketch up & running and can use the debug functions now: see http://forum.pjrc.com/threads/65-Tee...2246#post32246
    Last edited by Cas55; 06-06-2013 at 10:22 AM.

  6. #6
    Junior Member
    Join Date
    Jun 2013
    Posts
    13
    @Cass55 So to be clear, you now know which defines to set for your board such as keyboard, cpu speed etc so all is working including debug? Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •