Teensy 3.6 SoundTest and WAVPlayer works with test files but not my own

[ac2ev]

Trying to play some wav files from this website
https://themushroomkingdom.net/media/smb/wav
For Example
https://themushroomkingdom.net/sounds/wav/smb/smb_1-up.wav saved at 1UP.WAV to root of SD

I verified my hardware is working with the Hardware-Test beep.
I tried SDTEST1.WAV and that worked. However the wavs on this site don't.

SDTEST1.WAV
CODEC: PCM S16 LE (s16l)
TYPE: AUDIO
CHANNELS: Stereo
SAMPLE RATE: 44100Hz
BITS PER SAMPLE: 16

1UP.WAV
CODEC: PCM S16 LE (s16l)
TYPE: AUDIO
CHANNELS: Stereo
SAMPLE RATE: 22050Hz
BITS PER SAMPLE: 16
BITRATE: 352 kb/s

Is the Sample rate and bitrate making it unplayable?

 

[PaulS]

It's the sample rate, should be 44100 Hz. See here, in the right column, under Notes.

Paul

 

[ac2ev]

It's the sample rate, should be 44100 Hz. See here, in the right column, under Notes.

Paul

Thank you Paul. I did not look there.

 

[ac2ev]

I used Audacity to set the sample rate up to 44100Hz and amplified it. Works. Now to integrate to the project.