Hi Friends,
I'm running a Teensy 4.0 with a SmartLed Shield V5 and a 3 x [64x64] HUB 75 matrix - works like a charm.
Now I try to connect a generic SD Card module:
VCC - 5,5
GND - GND
MISO - Pin 12
MOSI - Pin 11
CS - Pin 10
SCK - Pin 13
My display (ScrollText) is now slightly garbled (Artefacts and/or "Shadows"), my ScrollText works, but is offset some pixels up. There seems to be a interference of some sort, regardless if a SD is inserted or not. I have NOT tested the SD card function until now.
Did anybody experience similar effects and how did you solve it?
THX
I'm running a Teensy 4.0 with a SmartLed Shield V5 and a 3 x [64x64] HUB 75 matrix - works like a charm.
Now I try to connect a generic SD Card module:
VCC - 5,5
GND - GND
MISO - Pin 12
MOSI - Pin 11
CS - Pin 10
SCK - Pin 13
My display (ScrollText) is now slightly garbled (Artefacts and/or "Shadows"), my ScrollText works, but is offset some pixels up. There seems to be a interference of some sort, regardless if a SD is inserted or not. I have NOT tested the SD card function until now.
Did anybody experience similar effects and how did you solve it?
THX