Hi, I'm new to the Teensy family so still working my way around the forums and code examples.
I'm trying to use if I can use the Audio adaptor board rev D + Teensy 4.0 to add bass boost and EQ to line in. The dap_bass_enhance example seems to be the perfect starting point. When I compiled the sketch, I'm getting very low headphone output level through the headphones compared to the PassThroughStereo sketch. The output level is restored after commenting out audioShield.audioPostProcessorEnable();
I've played around with adding digital gain but I'm getting clipping and generally lower audio quality. Is there a setting I need to set to get the SGTL5000 audio processor output to be the same quality as pass through?
Thanks,
Tan
I'm trying to use if I can use the Audio adaptor board rev D + Teensy 4.0 to add bass boost and EQ to line in. The dap_bass_enhance example seems to be the perfect starting point. When I compiled the sketch, I'm getting very low headphone output level through the headphones compared to the PassThroughStereo sketch. The output level is restored after commenting out audioShield.audioPostProcessorEnable();
I've played around with adding digital gain but I'm getting clipping and generally lower audio quality. Is there a setting I need to set to get the SGTL5000 audio processor output to be the same quality as pass through?
Thanks,
Tan